Flow Measurement – Torquelabs Engineering

Flexim FLUXUS G608 CA Energy – Thermal Energy Metering in Hazardous Areas

admin — Mon, 08 Jun 2026 10:32:15 +0000

The FLUXUS G608 CA Energy is the perfect multi-tool for Energy Managers. It combines portable and non-intrusive flow and thermal energy measurement of compressed air, technical gases and liquids. The ATEX/IECEx Zone 2 and FM Class I Division2 approved transmitter allows measuring in hazardous areas without additional authorizations and precautionary measures. The ultrasonic transit time principle provides great dynamic flow ranges and is capable of detecting even the smallest leakage, starting at 0.01 m/s (0.03 ft/s) flow velocity. Surveys of compressed air systems, verification of consumptions and check metering have never been so simple.

Flexim FLUXUS G731 ST-LT – Non-intrusive Steam Flow Measurement

admin — Mon, 08 Jun 2026 10:10:10 +0000

The Flexim FLUXUS G731 ST-LT is a non-intrusive, high-performing ultrasonic clamp-on flow meter capable of measuring steam up to 180 °C (356 °F). With up to two measuring channels, optimum recording is possible even with difficult flow conditions. An optional stainless-steel housing and FM Class I Division 2 certification allow usage in extreme conditions, and the flexible configuration options for signal inputs and outputs cover all manner of applications. For users, this means important advantages when considering the total cost of operating a measuring point. The transit time difference principle already works at 0.01 m/s (0.03 ft/s) and does not need any reduction to the diameter of the pipe to artificially increase the flow velocity.

Flexim FLUXUS F601 – Portable Non-intrusive Liquid Flow Meter

admin — Mon, 08 Jun 2026 10:07:42 +0000

The Flexim FLUXUS F601 is measurement ready in 5 minutes and is the portable clamp-on flow meter of choice for servicing and maintenance activities, the control and auditing of measurement points not covered by permanent meters, or even the temporary replacement of permanently installed flow meters. With its Li-Ion battery, the F601 allows for up to 25 hours of autonomous measurement. Matched and paired transducers, as well as sophisticated algorithms to correctly identify pipe wall echoes and wrong transducer positioning, ensure reliable and highly accurate measurements - even under the most demanding application conditions.

Flexim FLUXUS G601 Portable Ultrasonic Gas Flow Meter

admin — Mon, 08 Jun 2026 10:04:54 +0000

The Flexim FLUXUS G601 portable clamp-on ultrasonic gas flow meter measures the flow of virtually any gas using our proven transit-time correlation technique. The ultrasonic transducers are simply clamped onto the outside of the pipe, meaning no cutting into the pipe or process interruption is required for installation. This highly accurate flow meter for use in hazardous areas allows for accurate readings, allowing for an inherently bi-directional gas flow measurement of operational and standard volume flows. As the transducers are mounted on the outside of the pipe wall, the system does not suffer from wear and tear or clogging, can’t be a risk for leaks and will not cause any pressure drops inside the pipe.

Flexim Clamp-on Ultrasonic Flow Meters

admin — Mon, 08 Jun 2026 09:59:21 +0000

Non-Intrusive, Clamp-on Ultrasonic Technologies Emerson’s Flexim ultrasonic flow measurement technology measures liquids, gases, and steam without intrusion. Its clamp-on ultrasonic flow meters attach easily to the pipe’s exterior, requiring no operational interruptions or leak risks. Designed for industrial production and safety, these meters ensure maximum plant availability and reliable performance.

Rosemount™ 8785 Calibration Standard

admin — Mon, 08 Jun 2026 09:56:37 +0000

The 8785 Calibration Standard is designed for use with the 8782 Slurry Transmitter. It can be used to provide an independent on-site validation of the 8782 calibration.

Rosemount™ 8712EM Magnetic Flow Meter Transmitter

admin — Mon, 08 Jun 2026 09:54:09 +0000

Intuitive Local Operator Interface with dedicated keys enhance ease of use and enables instant access to all diagnostic information. Ideal for hazardous environments or difficult-to-reach locations.

Rosemount™ 8732E Field Mount Magnetic Flow Meter Transmitter

admin — Mon, 08 Jun 2026 09:51:31 +0000

A dual-compartment transmitter housing provides isolation from the external environment. Advanced diagnostics and through-the-glass Local Operator Interface offer unparalleled process insight.

Rosemount™ 8705 Flanged Magnetic Flow Meter Sensors

admin — Mon, 08 Jun 2026 09:46:09 +0000

Rosemount 8705 Flanged Magnetic Flow Meter Sensors provide long-lasting, reliable performance in even the most challenging applications. An all-welded construction provides a hermetic seal that protects against moisture and other contaminants. The sealed housing ensures maximum sensor reliability by protecting all internal components and wiring from even the most aggressive environments. A removable and replaceable terminal block enables easy repair in the field without the need to replace the entire meter.

Rosemount™ 8750W Magnetic Flow Meters for Utility Water Applications

admin — Mon, 08 Jun 2026 09:43:25 +0000

The Rosemount 8750W Magnetic Flow Meter reduces lifecycle costs and unplanned shutdowns by accurately measuring water and wastewater flows in a variety of utility applications. The 8750W is supported by intelligent diagnostics that help users take advantage of improved installation, maintenance and process-management practices. With fully welded sensor construction and an isolated, replaceable terminal block the 8750W is the most dependable meter available for utility and water applications.